The immediate impact of bonded rapid maxillary expansion on the naso-pharyngeal airway patency: a prospective CBCT study

Introduction: Recent studies have utilised cone beam computed tomography (CBCT) for the assessment of the volume of the nasopharyngeal airway space (Guijarro-Martínez and Swennen, 2013, Lenza et al., 2010, Woodside and Linder-Aronson, 1979, Chang et al., 2013). Some of these investigations are based on the analysis of slice data obtained from three dimensional (3D) radiographic images. The usage of a CBCT scan to measure the nasopharyngeal airway volume has drawbacks which include the effect of respiration and tongue position (Abbott et al., 2004), the impact of head posture, lordosis (cranio-cervical inclination) and mandibular morphology on the accuracy of measuring air oro-pharyngeal airways. In addition, published figures to date has not considered the detailed anatomical boundaries of the nasal cavity space, paranasal airway space and other pharyngeal sections collectively (Chang et al., 2013). Aims and objectives: The aim of the study was to assess the validity of the free access software package like ITK Snap in measuring the airways spaces, investigate, using CBCT, the three-dimensional effect of rapid maxillary expansion on the maxillary sinus, the lower part of the nasal cavity, the upper nasopharynx and the upper oropharynx (upper and lower retropalatal spaces), and to correlate the changes in these anatomical spaces with the measured RME appliance split, the dentoalveolar expansion and the gender of the subjects. Materials and methods: This study was carried out on seventeen patients (8 boys, 9 girls; mean age 12.6 + 1.8 years) who required maxillary expansion for the management of narrow upper dental arch. Sample size was calculated using the Researcher’s Toolkit calculator and this indicated that a sample size of 14 patients would produce an Alpha error level or confidence level at 95% and a Beta error level at 20%. Therefore, it was decided to recruit 17 subjects to overcome potential exclusion due to irreproducibility in the head orientation and lordosis. Pretreatment (T1) and immediate post-RME (T2) CBCT images were taken for all the patients. In all CBCT images, head orientation and lordosis were measured using OnDemand 3D software packages. Cases were excluded from the study if the difference in the head orientation and lordosis between the CBCT of T1 and CBCT of T2 was more than 5 degrees. The two scans, T1, T2, were orientated according to a specific protocol and superimposed on the cranial base to standarise the volumteric segemtation and measurements. The impact of RME was assessed by measuring, using ITK snap and OnDemand 3D software packages, the changes in the distance between the intermolar dentoalveolar width at level of molar alveolar crest (IMD), the magnitude of appliance expansion (AE), the volume of respiratory region or the lower part of the nasal cavity (LNC), the volume of the right and left maxillary sinus (RMS and LMS), the volume of the upper nasopharynx (UNP), the subdivisions of the upper oropharynx including the upper and lower retropalatal space (URP and LRP) at T1 and T2. Segmentation of the oro-naso-pharyngeal spaces into multiple segments allows a deailed localisation of the changes and aids in exclusion of any potential masking change of one airway space on adjacent or remote airway space as each segment is associated anatomically and physiologically to different function and/or disorder. The normality of the data was tested using Kolmogorov–Smirnov test. The reproducibility of meaurements was analysed using Paired t-test and interclass correlation coefficient. The volumteric and linear changes was assessed using Student t-test (P<0.05) and Pearson correlation coefficients was used to test the correlation of these changes. Results: Bonded RME has an effective dentoalveolar expansion effect in growing patients (P=0.001) and produced a significant increase in UNP (P=0.045). There was a statistically significant reduction on the URP space (P=0.042), especially in males. There was strong correlation between the increase of the volume of the right and left maxillary sinuses (PCC=0.86) and between appliance expansion and dentolavelar expansion (PCC=0.75). Conclusions: ITK-SNAP software is a reliable package and a single threshold value (-450 grey) is an accurate value. Additionally, this software can be used to measure the size of bony defect in patient with cleft palate before secondary alveolar bone grafting. Bonded RME was an effective dentoalveolar expander in growing patients and the immediate expansion of LNC and UNP might be associated with a reduction in nasal resistance, improvement in the nasal breathing and it can be considered as an option for treatment of Paediatric Obstructive Sleep Apnea Syndrome. Findings of this dtudy showed that there is a sexual dysmorphisim secondary to RME but did not reach the statistical significance. Generally, the effect of the RME on the upper naso-oro-pharyngeal airway spaces followed a mushroom like pattern with the upper parts expanded, the middle part was significantly narrowed while the lower part was mildly, but insignificantly statistically, reduced. However, it is essential to consider that regardless of the benefit of the increase nasal patency of this orthopeadic procedure, it should not done merely for the above purposes solely but only when it is linked to a right indication for RME. A future studies could include a colour mapping for detailed assessment of changes in different part of the oro-naso-pharyngeal space, as the shape changes of the airway space is as important as volumetric changes. Finally, a further randomised clinical trial or comparative study with larger sample size and long term follow up would be beneficial in estimating the real impact of the RME on the airway confirm the findings of this study

Innovation in prediction planning for anterior open bite correction

This study applies recent advances in 3D virtual imaging for application in the prediction planning of dentofacial deformities. Stereo-photogrammetry has been used to create virtual and physical models, which are creatively combined in planning the surgical correction of anterior open bite. The application of these novel methods is demonstrated through the surgical correction of a case

Anchorage effectiveness of orthodontic miniscrews compared to headgear and transpalatal arches:a systematic review and meta-analysis

Background: Anchorage in orthodontics can be provided through several extra- and intra-oral sources including headgear, teeth, cortical bone and soft tissue. Objective: The aim of this review was to systematically review the effectiveness of miniscrews in reinforcing anchorage during en-masse retraction of anterior teeth in comparison to conventional anchorage appliances. Search method: Comprehensive searching of the electronic databases was undertaken up to March 2018 in the Cochrane Database of Systematic review, Cochrane Central Register of Controlled Trials, MEDLINE via PubMed and Scopus databases. Additional searching for on-going and unpublished data and hand search of relevant journals were also undertaken, authors were contacted, and reference lists screened. Eligibility criteria: Searches were restricted to randomized clinical trials (RCTs) published in English, which compared anchorage reinforcement using mechanically-retained miniscrews (diameter of 2 mm or less) to conventional anchorage appliances during en-masse retraction of anterior teeth in participants of any age treated with fixed appliances combined with extraction of maxillary premolars. Data collection and analysis: Blind and induplicate study selection, data extraction and risk of bias assessment were undertaken. The primary outcome was the amount of mesial movement of the upper first permanent molar (anchorage loss) while secondary outcomes included treatment duration, number of visits, adverse effects and patient-centered outcomes. The risk of bias was assessed using Cochrane risk of bias tool. A random-effects model with its corresponding 95% confidence interval (CI) were generated for comparable outcomes. Statistical heterogeneity across the studies were assessed using the I2 and Chi2 test. Additional sensitivity tests were implemented. Results: Seven RCTs met the inclusion criteria, however, data of 241 participants from 6 RCTs (250 miniscrews and 134 conventional anchorage appliances) were meta-analyzed. Qualities of the included RCTs varied from low to high. The standardized mean difference (SMD) of the anchrage loss between the two intervention groups was 2.07 mm ((95% CI (–3.05) to (–1.08), p I2 = 88%, 6 RCTs)) in favour of miniscrews, which was also preserved after excluding the high risk of bias studies (SMD 1.94 mm, 95% CI (–2.46) to (–0.42) p I2 = 93%, 3 RCTs)). Information on overall treatment duration, space closure duration, quality of treatment, patient-reported outcomes, adverse effects and number of visit were limited. Conclusion: The result of the meta-analysis suggested that there is moderate quality of evidence that miniscrews are clinically and statistically more effective in preserving orthodontic anchorage than conventional appliances. However, this conclusion is supported by a small number of studies with variable qualities. High-quality RCTs would give a better understanding of miniscrews effectiveness in providing orthodontic anchorage.</p

3D effects of a bone-anchored intra-oral protraction in treating class III growing patient: a pilot study

Objectives: The aim of this prospective case series study is to assess the three-dimensional (3D) skeletal and soft tissue effects of the alternate rapid maxillary expansion and constriction (Alt-RAMEC) protocol in conjunction with a miniscrew-supported class III elastic wear in class III growing patients. Materials and methods: Fourteen consecutive participants (mean age 12.05 ± 1.09 years), who displayed class III malocclusions with retrognathic maxillae, were recruited. A cone beam computed tomography (CBCT) scan was acquired before commencing treatment (T1). All participants were treated with a tooth-bone-borne rapid maxillary expansion (hybrid MARME) appliance that was activated by the Alt-RAMEC protocol for 9 weeks. This was followed by full-time class III elastics, delivering 400 g/side, to protract the maxilla. When a positive overjet was achieved, protraction was ceased and a post-treatment CBCT scan (T2) was taken. The 3D analysis of pre- and post-treatment CBCT scans was blinded. The scans were registered on the anterior cranial base. The Euclidean distance between the two extracted surface models of the pre- and post-treatment scans was displayed as a color surface map. Results: All participants completed the intervention successfully. The majority of the participants showed protraction of the anterior maxillary region (71.4%) and in the zygomatic processes (64.2%). The maxilla significantly protracted (SNA 1.87° ± 1.06°; Vert.T-A 3.29 ± 1.54 mm), while the mandibular base significantly redirected posteriorly (SNB − 2.03° ± 0.85°, Vert.T-B − 3.43 ± 4.47 mm) and that was reflected on the ANB and Wits measurements. No adverse effects were observed. Conclusion: Class III elastics combined with the Alt-RAMEC activation protocol of the hybrid MARME appliance is an effective treatment method for mild/moderate class III malocclusions. A long-term follow-up and comparisons with other treatment modalities are required

Phone-based audience response system as an adjunct in orthodontic teaching of undergraduate dental students: a cross-over randomised controlled trial

Background: The advent of electronic teaching facilities improves tutor-student communication. This study aims to explore the effectiveness of Phone-Based Audience Response System (PB-ARS), as an adjunctive pedagogy tool to enhance the retention of orthodontic information by dental students; and to explore the students’ perception of PB-ARS. Methods: This cross-over clustered randomised control trial included 34 males who were in the final year of their undergraduate dental training. Participants were allocated to one of two event groups (G1 and G2) using computer-generated randomisation. Both groups simultaneously attended two different traditional lectures (L 1 and L2) a week apart. During L1, PB-ARS was used as an adjunct to conventional presentation to teach G1 participants, (PB-ARS group) while G2’s participants acted as a control group (CG), and were taught using a traditional presentation. In the second week (L2), the interventions were crossed-over. Participants from both groups completed pre- and post-lecture multiple-choice questionnaires (MCQ) to assess their short-term retention of information. Their performance in the final MCQ exam (10 weeks following L2) was tracked to assess the long-term retention of the information. Participants also completed post-lecture questionnaires to evaluate their perceptions. Results: Twenty-nine and 31 participants from the CG and PB-ARS group completed this trial, respectively. Although 87.5% of students in the PB-ARS group showed an improvement in their immediate post-lecture scores compared with 79.3% for the CG, it was statistically insignificant (p = 0.465). Similarly, the intervention showed an insignificant effect on the long-term retention of the knowledge (p = 0.560). There was a mildly but favourable attitude of students towards the use of PB-ARS. However, the difference in the overall level of satisfaction between both groups was statistically insignificant (p = 0.183). Conclusion: PB-ARS has a minimal and insignificant effect on the short- and long-term retention of orthodontic knowledge by male undergraduate dental students. PB-ARS was the preferred adjunct tool to conventional classroom teaching. Due to the limitations of this trial, a long-term randomised controlled trial with a larger sample size is recommended